Install pvc ceiling

Overlap the edges with the previous sheet and press firmly with fingertips, after completing the first straight row, work your way to the sides. It is recommended to paint the grid before installing faux tin ceiling tiles, you can use spray cans, spray gun or foam roller. Removing existing tiles while painting the grid is unnecessary Select the paint to compliment the tiles finish — i. Using existing old drop tiles as support simply resurface them with our new glue up faux tin ceiling tiles glue them one by one to the base ceiling tiles and place them on to the grids If necessary trim the edges of the PVC tiles to make them fit the grid size.

Finally install the resurfaced ceiling tiles on to the grids. Our clients often ask us whether it is possible to install our faux tin ceiling tiles with nails, so we decided to make a quick tutorial on how to do this.

Check out our guide and have fun with your new home decor project. The editor will introduce the installation steps of PVC ceiling in detail below. The installation steps of PVC ceiling are divided into: spring line, installation of main beam, installation of wooden keel, and bread installation. First, the elevation line should be popped around the wall, and the pressure line should be fixed with cement nails at both ends of the wall. According to the standard height, the elastic line should be popped around the wall as the standard line for ceiling installation.

The allowable error is 5mm. Fix the side keel with bone cement nails along the elevation line, determine the position of the keel, and then install the keel. It should be noted that generally, for small kitchens or bathrooms, keels can be omitted, and keels can be laid in the middle for larger ceiling areas. When installing keels, pay attention to leaving the exit of the lighting line. After drilling the hole on the top of the wall, knock in and fix the three-piece expansion screw.

Expansion screws are used to hang the keel, and it should be set in three sets before installing the roof in advance. When the holes on the top wall are completed, use a hammer to drive the expansion screws into the holes on the top wall. After the expansion screw set is installed, fix the keel on it.

The keel is divided into the main keel and the auxiliary keel. The two keels should be connected with a hanging piece, and then hung on the three-piece set of expansion screws. After the keel is hung up, the distance between the keels should be adjusted. Generally, this distance is the distance of the gusset you want to install. After the installation of the keel is completed, start to install the edge trim.