Windows 98 maximum hard drive size

Although Windows 98 and 98SE are versatile operating systems, both were designed to run on Intel xbased processors. They also do not support multiple processors; although both will run properly on multiprocessor computers, they will access only one of the processors. Note: You cannot install Windows on a computer using a based B-step processor.

To find out if you have this type of processor, you can either check your system documentation or use a utility such as Microsoft System Diagnostics to check the ID of your processor B-step processors have an ID of The only thing you must remember is that you cannot install windows 98 from Windows XP environment.

The install will ask for the drive to install to when you do so? Windows 98 has no built-in support for NTFS. This is not a problem, but a missing feature.

Windows 98 cd's are not bootable for the most part so in order to partition a new hard disk in preparation of a windows 98 install, you will need to make a boot floppy or boot CD, or USB which will enable you to partition and format the disk for windows install. Follow the link below for some disk images, utilities, and workarounds for the windows 98 bootdisk dilemma.

The Command-line interface CMD can be used to partition a new hard drive. Windows 98 does not support the ntfs file system. You can not disable a partition in Windows 98 but you can remove it everything on the partition will be lost if not saved beforehand on a cdr-rw or another hard drive.

Boot up with a windows 98 floppy with th Operating System on it and the the Fdisk. At the "A" prompt, type "fdisk" and press enter. When the fdisk screen pops up, first be sure which partition you want to delete D,E etc so you don't delete the partition with your operating system on it the "C" drive.

Once you have determined which partition is to be deleted, follow the onscreen instructions to remove the correct one. When finished, close out the program and reboot the system and the partition should be gone.

On a Windows 98 system, there is very likely to only be one partition on the disk. The difference between formatting the disk and deleting the partition would thus be a matter of semantics.

Either way, all the data on the hard drive would be gone. Set the primary partition containing Windows XP to active. Create two partitions in ur hard drive and install Windows '98 on Drive C and install Windows on Drive D to another partition. Its depend on your window. It is not recommended that you downgrade.

Were you to downgrade, you would just insert the 98 install disk and format over XP or maybe make a partition. All forum topics Previous Topic Next Topic. Replies 6. In order to answer your questions we would need to know which model computer you have. Majestic 7 Gold. Thanks for the replies. What does it say on the front of the case?

The model number is listed on top of the BIOS page. Western Digital Gigs. Both say larger drives or may require an additional controller card. Comments: Hello Scott , welcome to our forum! Let me clarify this situation you described: Acronis Migrate Easy will work with all drives which correctly recognized by BIOS and your operating systems.

Please let me know if you have any other questions concerning our products. Thank you. Hello Scott , Let me clarify this question too. Flame Tech IT. Forum Star. Posts: